Less charged DIBMA One challenge when working with traditional DIBMA is its... more
Product information "DIBMA Glucosamine, TRIS"
Less charged DIBMA
One challenge when working with traditional DIBMA is its sensitivity to the presence of ions inside the buffer / media. The reason for this is DIBMAs own charge that lets it interact with these ions. This leads to precipitation of DIBMA and therefore loss of its function. To overcome this issue we modified DIBMA to have a reduced charge to drastically reduce the affinity to the ions. This was achieved by adding Glucosamine or an amino-functionalized diol to DIBMA (see figure 1). This modified DIBMA can be used for experiments for which the presence of ions is crucial for their success.
Fig. 1: Chemical structural formula of diisobutylene-maleic acid (DIBMA) Glucosamine.
Fig. 2: DIBMA precipitation in relation to the ion concentration. The shown concentrations start at 5 mM and increase in 5 mM steps up to 50 mM.
As figure 2 indicates, the increased tolerance of Ca2+ is necessary. Normally, DIBMA starts to precipitate in Ca2+ holding buffers at a concentration of around 25 mM. Using DIBMA-Glycerol this tolerance increases to 50 mM. There is no precipitate visible at the bottom of the tube. In comparison normal DIBMA shows a visible precipitate at 25 mM. In terms of Mg2+ tolerance, traditional and Glycerol DIBMAs both show a high tolerance above 50 mM.
Related links to "DIBMA Glucosamine, TRIS"