SMALP 140-I

Order number: 18230

€246.00*

Ready to ship today
Quantity

Description

The SMALP 140-I, our other SMALP products has been developed for for the solubilization of membrane proteins. SMALP 140-I is special among other SMAs as it contains a maleimide function and therefore its standard structure derives from standard SMAs. After dissolving buffer powder + SMALP 140-I in dH2O, the product is ready-to-use. SMALP 140-I has a brownish color in solution. After successfull solubilization of the membrane protein, the protein can be purified using affinity chromatography. For membrane protein purification we recommed to use the Rho1D4-tag. Cube Biotech offers the matching products for this purpose.
Feature
State Lyophilized Powder, to be solved with water
Polymer styrene-to-maleic anhydride ratio 1.4:1
Molecular weight 5,000 Da
pH after solving 7.5
Solubility 38 %
Divalent cationic tolerance > 100 mM
Color Yellowish
Odor Odorless
Freeze-thaw stable? Yes
Shipping Temperature 2-8°C
Storage of lyophilized copolymer -20°C for several years
Storage of dissolved copolymer 2-8°C for several days
Other noteworthy feature Is imidized with DMAPA
Structure SMALP 140 I

Citations

Lab Results

SMALP Screening: Different membrane protein usually perform different under different SMAs variants respectively. To ease the resulting screening process we compiled all of our SMAs into a convenient SMALP Screening Set. Furthermore if you like to compare proteins's performance between SMA and DIBMA in synthetic nanodiscs, we also offer our, that includes both our SMA and DIBMA products.
SMALP Western Blot of a purified membrane protein
Figure 1: Western Blot of a purified membrane protein after stabilization through SMA. Reproduced with permission from Ms S. Nestorow, University of Birmingham.

Video

Watch our video on the use of synthetic polymers for membrane protein solubilization. It demonstrates the use with SMALP.

FAQ

What SMA is the best one to use?

This is a tricky question, as it depends on the membrane protein which SMA performs best, however, SMA 200 is in general the most recommended. Keep in mind that this is no guarantee for it to be the best but in our experience, it is a good allrounder.

What are the recommended concentrations of SMA?

Mix the supplied solutions at a concentration of 1-5% SMALP to the total solution. These conditions can be used as indications. The optimal SMA concentration must be determined separately for each experiment.

How is SMA stored?

Store in cool and dry places, protected from direct sunlight. Long-term storage is recommended at 4°C

The viscosity of my SMA has decreased, what happened?

This can occur by storing SMA at low temperatures (as recommended!). Simply warm the SMA solution up to room temperature to restore its original viscosity.

How do I quantify the amount of protein after SMA treatment?

In contrast to DIBMA, SMA absorbs light at 280 nm similar to proteins. Therefore ultraviolet absorption is no option here. However other protein quantification assays are viable options like:
  • Bicinchoninic Acid (BCA)
  • Bradford
  • Folin-Lowry in some cases

Disclaimer

The use of this styrene maleic acid copolymer (SMA) product for the manufacture of styrene maleic acid copolymer - lipid particles (SMALP), and the use of SMALP, are covered by one or more of the following patents owned by Malvern Cosmeceutics Limited: US 8623414, EP 1890675, GB 2426703, AU 2006253886, JP 5142898, IN 261468, CN ZL200680018957.2 and CA 2,611,144 and by the University of Birmingham: US 8754168.

The purchaser is licensed under those patents to use the SMA for the manufacture of SMALP and to use the SMALP for the purpose of research and development of proteins, including their production (including purification and solubilisation), screening testing, analysis, characterisation (including structural analysis and characterisation), including for the purpose of drug screening and for the purpose of in vitro diagnostics, but not for the purpose of delivery of agents to humans or other animals for therapeutic, diagnostic (including in vivo diagnostics) or prophylactic purposes, which uses are specifically prohibited.

The use of SMALP 502-E within the United States is not covered by our current license and this product can therefore not be made available for US purchasers.